Subsea Compression and Pumping Systems Training Course

Subsea Compression and Pumping Systems Training Course

Introduction

Subsea Compression and Pumping Systems Training Course is a designed to equip oil and gas professionals with the technical knowledge and practical skills required to design, operate, optimize, and maintain advanced subsea production systems. This course explores the engineering principles behind subsea gas compression, liquid boosting, multiphase pumping, pressure management, and flow assurance, with a strong emphasis on modern subsea infrastructure and integrated offshore production systems. Participants will examine subsea equipment architecture, compressor and pump selection, hydraulic performance, power transmission, control systems, instrumentation, and subsea-to-surface integration. The programme also addresses emerging industry priorities, including digital oilfield technologies, predictive maintenance, energy efficiency, operational reliability, and lifecycle cost optimization.

The training covers subsea system design, reservoir pressure support, production debottlenecking, long-distance subsea tiebacks, gas reinjection, artificial lift integration, and enhanced hydrocarbon recovery. Particular attention is given to equipment reliability, materials selection, corrosion and erosion management, hydrate prevention, vibration monitoring, and failure analysis under demanding subsea operating conditions. Participants will also explore risk-based maintenance strategies, condition monitoring, digital twins, remote operations, and performance optimization using real-time production data. By combining fundamental engineering concepts with practical applications, this course helps organizations strengthen subsea asset integrity, reduce unplanned downtime, improve recovery factors, and achieve cost-effective offshore production. It is suitable for professionals seeking to enhance their expertise in next-generation subsea technologies and support the development of safe, reliable, and commercially viable offshore oil and gas projects.

Course Duration

5 days

Course Objectives

By the end of this course, participants will be able to:

1. Explain the fundamental principles of subsea compression and pumping technologies and their applications in offshore field development.
2. Evaluate subsea compression and boosting solutions for improving reservoir recovery and extending field production life.
3. Analyze the performance characteristics of subsea gas compressors, centrifugal pumps, and multiphase pumping systems.
4. Apply subsea system design principles to equipment selection, hydraulic calculations, and production capacity planning.
5. Assess the integration of subsea compression and pumping systems with subsea trees, manifolds, flowlines, risers, and host facilities.
6. Identify and mitigate flow assurance challenges involving hydrates, wax deposition, slugging, and multiphase flow instability.
7. Interpret compressor and pump performance curves to optimize operating efficiency and production throughput.
8. Evaluate subsea power supply, electrical distribution, control systems, and instrumentation requirements.
9. Implement predictive maintenance and condition monitoring strategies to improve subsea equipment reliability.
10. Conduct preliminary failure analysis and identify measures for reducing equipment downtime and lifecycle costs.
11. Apply risk assessment methodologies to subsea equipment installation, commissioning, and operation.
12. Utilize digital monitoring, automation, and digital twin technologies to support subsea performance optimization.
13. Develop integrated strategies for improving energy efficiency, asset integrity, operational safety, and long-term subsea production performance.

Target Audience

1. Subsea engineers and subsea production system specialists.
2. Petroleum engineers and reservoir engineers involved in offshore field development.
3. Mechanical engineers specializing in rotating equipment and turbomachinery.
4. Production engineers and offshore operations personnel.
5. Flow assurance engineers and multiphase flow specialists.
6. Maintenance, reliability, and asset integrity engineers.
7. Project engineers, engineering managers, and offshore project coordinators.
8. Technical consultants, oil and gas project developers, and energy professionals involved in subsea technology selection.

4. Training Course Modules

Module 1: Fundamentals of Subsea Compression and Pumping Systems

• Overview of subsea production systems and offshore field development concepts.
• Principles of subsea gas compression, liquid boosting, and multiphase pumping.
• Comparison of topside and subsea compression and pumping configurations.
• Applications in deepwater fields, marginal reservoirs, and long-distance tiebacks.
• Case study: Evaluating subsea boosting as a solution for extending production from a mature offshore field.

Module 2: Subsea Compression Technology and Equipment Design

• Fundamentals of centrifugal compressor operation and compression thermodynamics.
• Subsea compressor configurations, including single-stage and multistage systems.
• Compressor performance maps, operating envelopes, and efficiency evaluation.
• Gas conditioning, inlet separation, and management of liquid carryover.
• Case study: Selecting a subsea gas compression configuration for a declining-pressure offshore gas reservoir.

Module 3: Subsea Pumping and Multiphase Boosting Technologies

• Design principles of subsea centrifugal pumps and multiphase pumping systems.
• Pump performance curves, head, flow rate, power consumption, and efficiency.
• Selection of pumping technologies based on fluid properties and production requirements.
• Management of gas fractions, cavitation risks, and pump operating limits.
• Case study: Comparing liquid boosting and multiphase pumping options for an offshore oil field with increasing water production.

Module 4: Subsea System Integration and Field Development Planning

• Integration of compression and pumping equipment with subsea manifolds and trees.
• Subsea flowline, riser, umbilical, and host-facility interface requirements.
• Tieback distance, backpressure, reservoir deliverability, and production optimization.
• Equipment layout, installation considerations, and subsea architecture selection.
• Case study: Developing an integrated subsea boosting concept for a remote deepwater field connected to an existing floating production facility.

Module 5: Flow Assurance and Hydraulic Performance Optimization

• Multiphase flow behavior in subsea pipelines and production systems.
• Hydrate formation, wax deposition, scale, corrosion, and erosion management.
• Pressure-drop calculations, transient flow analysis, and slugging mitigation.
• Thermal management, chemical injection, and production stability strategies.
• Case study: Resolving declining production caused by high backpressure and flow instability in a long subsea tieback.

Module 6: Subsea Power, Controls, Instrumentation, and Automation

• Subsea power distribution, electrical drives, and variable-speed motor technologies.
• Control architectures, sensors, actuators, and subsea communication systems.
• Compressor and pump monitoring through pressure, temperature, vibration, and flow measurements.
• Integration of subsea equipment with distributed control systems and remote operations.
• Case study: Investigating performance instability associated with subsea power supply and control-system limitations.

Module 7: Reliability Engineering, Maintenance, and Operational Risk

• Reliability, availability, and maintainability principles for subsea rotating equipment.
• Failure modes and effects analysis (FMEA) and risk-based inspection planning.
• Condition monitoring, predictive maintenance, and fault detection techniques.
• Materials selection, corrosion protection, vibration control, and equipment integrity.
• Case study: Developing a reliability improvement plan following repeated subsea pump trips and unexpected production losses.

Module 8: Digital Technologies, Economics, and Future Subsea Innovations

• Application of digital twins, real-time analytics, and AI-assisted equipment monitoring.
• Energy efficiency optimization and subsea equipment lifecycle cost assessment.
• Production forecasting, intervention planning, and performance benchmarking.
• Emerging technologies in all-electric subsea systems, autonomous monitoring, and subsea processing.
• Case study: Evaluating the technical and economic benefits of digital monitoring and subsea compression in extending the productive life of a mature offshore asset.

Training Methodology

• Interactive lectures and presentations.
• Group discussions and brainstorming sessions.
• Hands-on exercises using real-world datasets.
• Role-playing and scenario-based simulations.
• Analysis of case studies to bridge theory and practice.
• Peer-to-peer learning and networking.
• Expert-led Q&A sessions.
• Continuous feedback and personalized guidance.

Register as a group from 3 participants for a Discount

Send us an email: info@datastatresearch.org or call +254724527104 

Certification

Upon successful completion of this training, participants will be issued with a globally- recognized certificate.

Tailor-Made Course

 We also offer tailor-made courses based on your needs.

Key Notes

a. The participant must be conversant with English.

b. Upon completion of training the participant will be issued with an Authorized Training Certificate

c. Course duration is flexible and the contents can be modified to fit any number of days.

d. The course fee includes facilitation training materials, 2 coffee breaks, buffet lunch and A Certificate upon successful completion of Training.

e. One-year post-training support Consultation and Coaching provided after the course.

f. Payment should be done at least a week before commence of the training, to DATASTAT CONSULTANCY LTD account, as indicated in the invoice so as to enable us prepare better for you.